BSPP male triple branch reducer is used to branch three lines at right angles with down sizes and one line at the same direction from a female thread. External tightening with a flat wrench. The thread can be immediately quality sealed by equipping with an O-ring.
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||
| BSPP, G — 55° Parallel Pipe Thread | |||
| G1/8 | G1/4 | G3/8 | G1/2 |
Metric Tube (mm)–Thread (BSPP, G)
| Part No. | Tube ΦD1 / ΦD2 | Thread (PT, R, BSPT) |
| PKD 06-04-G01 | 6mm / 4mm | G1/8 |
| PKD 06-04-G02 | 6mm / 4mm | G1/4 |
| PKD 08-06-G01 | 8mm / 6mm | G1/8 |
| PKD 08-06-G02 | 8mm / 6mm | G1/4 |
| PKD 08-06-G03 | 8mm / 6mm | G3/8 |
| PKD 10-08-G01 | 10mm / 8mm | G1/8 |
| PKD 10-08-G02 | 10mm / 8mm | G1/4 |
| PKD 10-08-G03 | 10mm / 8mm | G3/8 |
| PKD 12-10-G02 | 12mm / 10mm | G1/4 |
| PKD 12-10-G03 | 12mm / 10mm | G3/8 |
| PKD 12-10-G04 | 12mm / 10mm | G1/2 |