Thread Standard and Type R, PT, BSPT — 55° Taper Pipe Thread R1/8 R1/4 R3/8 R1/2 NPT — 60° American Standard Taper Pipe Thread NPT1/8 NPT1/4 NPT3/8 NPT1/2 Metric Thread M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5 Cautions in Application of Tube Joint Metric…
Thread Standard and Type R, PT, BSPT — 55° Taper Pipe Thread R1/8 R1/4 R3/8 R1/2 NPT — 60° American Standard Taper Pipe Thread NPT1/8 NPT1/4 NPT3/8 NPT1/2 Metric Thread M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5 Cautions in Application of Tube Joint…
BSPP pneumatic push in fittings male double banjo y (tubing fittings) is used to connect four tubes at a 90° angle to a female thread. External tightening with a flat…
BSPP one touch tube fittings male banjo y (pneumatic fittings) is used to connect two tubes at a 90° angle to a female thread. External tightening with a flat wrench…
BSPP one touch tube fittings male triple banjo (air fittings) is used to connect three tubes at a 90° angle to a female thread. Tightened on the top of the fitting…
BSPP one touch tube fittings male double banjo (push in fittings) is used to connect two tubes at a 90° angle to a female thread port. External tightening with a…
BSPP one touch tube fittings male delta branch (push in fittings) is used to connect female thread fittings and four tubes. External tightening with a flat wrench. The thread can be…
BSPP bulkhead female connector is a kind of commonly used BSPP pneumatic fittings, one touch tube fittings with O-ring and BSPP push in fittings. Bulkhead female connector connects a male…
BSPP female banjo connects a tubing at a 90° angle to a male threaded port. Tightened on the top of the fitting by use of a flat wrench or a…
BSPP male banjo connects a tubing at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a…
BSPP male triple branch reducer is used to branch three lines at right angles with down sizes and one line at the same direction from a female thread. External tightening…
BSPP male triple branch is used to branch three lines at right angles and one line at the same direction from a female thread. External tightening with a flat wrench.…